347
Series
82
SPOOL TYPE - VALVE FUNCTION
0 Individual base or manifold only
A Single Operator - single pressure
B Double operator - sinle pressure
C Single operator - dual pressure
D Double operator - dual pressure
E 3-position closed center
F 3-position open center
G 3-position single pressure, pressure center
H 3-position dual pressure,* pressure center
J Single solenoid single pressure
solenoid on B end
K Single solenoid dual pressure
solenoid on B end
L 3-position dual pressure,* open center
M 3-position dual pressure,* closed center
* Note: For dual pressure w/o regulators consult
factory.
82A - XX - XXX - (XX - DXXX - XXX)
BODY
OPTIONS
IND. & MANIFOLD BASE PORT CONFIG.
--Individ ual Base--
0 Valve only - no base
A Standard side ports (1/8”, 1/4”, or 3/8”)
B Bottom ports only*
C Side and bottom ports*
D Side inlet, side exhaust, bottom cylinder ports*
* Bottom ports available in 1/8” & 1/4” only in individual
base
--Manifold Base--
K Standard ports (1/4” or 3/8” only)
L Bottom cylinder ports*
M Bottom inlet port
N Bottom inlet and cylinder ports*
P Bottom and end cylinder ports*
R Bottom cylinder & end cylinder ports w/bottom inlet port*
S Selector base - standard side ports
* Bottom parts available in 1/4” & 3/8” only on manifold.
Bottom inlet available 1/4” only.
For bottom O-ring ports, consult factory.
BASE
OPTIONS
PILOT
VALVE
INT. OR EXT. PILOT*
--Internal Pilot--
0 Valve only - no base
A No light in base
--External Pilot--
0 Valve only - no base
D No light in base
* Use internal for main valve
pressures of 25-150 PSIG. Use
external for main valve pressures
of 28” Hg vacuum - 25 PSIG
PILOT VALVE OPTIONS - (XX - DXXX - XXX)
BODY TYPE
A Plug-in body
B Non Plug-in body
PORT SIZE - THREAD TYPE
0 Valve only - no base
A 1/8” NPTF
B 1/4” NPTF
C 3/8” NPTF
D 1/8” BSPPL
E 1/4” BSPPL
F 3/8” BSPPL
PILOT EXHAUST
FA Muffled exhaust
LEAD WIRE LENGTH
--Plug-in Valve/Base--
P Plug-in 8” - standard
1 18” 4 48”
2 24” 5 72”
3 36” 6 96”
--Non Plug-in Valve/Base--
A 18” E 72”
B 24” F 96”
C 36” J 6”*
D 48”
* Lead wire length for external
plug-in connectors must be “J”
ELECTRICAL CONN.
--Plug-in Valve/Base--
DA Plug-in (standard)
--Non Plug-in Valve/Base--
BA Grommet
CA Conduit 1/2” NPS
CM Metal conduit 1/2” NPS
CN Metal conduit w/grd.
1/2” NPS
--External Plug-in--
JB Rectangular plug-in
JM Rectangular male only
KA Mini plug-in
KJ Mini plug-in male only
TA Dual tabs (.110) w/
receptables
TJ Dual tabs (.110) w/o
receptables
VOLTAGE
FR 12VDC (0,6w)
FS 24VDC (0,6w)
MANUAL OPERATOR
0 No manual operator
1 Nonlocking operator
2 Locking operator
3 Nonlocking extended operator
4 Locking extended operator
HOW TO ORDER 82 SERIES FLOW CONTROL MODULE*
NOTE: Reference regulator ordering section if a
sandwich regulator is required.
NOTE: If a flow control assembly is used with the dual
pressure regulator option, only the flow control on the
“A” end is functional. (Controls both cylinder ports.)
FC 82A-AA
FC 82A-BA
Plug-in flow control assembly
Non plug-in flow control assembly
*If flow control module is to be installed between valve and base or valve and manifold at the factory,
add -9 after the flow control model number, i.e., FC82A-AA-9. The flow control model number
should follow the valve model number on which it is to be installed.
Intrinsically Safe Valves
HOW TO ORDER
Consult “Precautions” page 364 before use, installation or service of MAC Valves